The machine is divided into 4 parts:bottle washing, pulp filling, juice filling, capping.
Bottle washing - The clamps hold the bottle neck and turn bottles along the guide rail.
Pulp filling - Clean bottles enter the pulp filling position. The empty bottles will be rised to start to filling along the rail.
Juice filling - After pulp filling, the bottles enter the juice filling position. Then the grippers hold the bottle neck and start to fill juice.
Capping - When bottles enter capping position the sensor will send the signal and the caps will be fed by air cylinder. The capping process will begin.
When tank liquid level is low, the liquid input valve will open and start to input liquid automatically.
The machine is controlled by PLC and touch screen. The machine can be operated and inspected by one operator. SUS304/316 structure with good surface treatment is anti-corrosion and easy to clean. Igus sleeve in the machine can make sure the longer self-life and reduce the maintenance cost.
Reductor of main motor
Transport system reductor
We're Here to Help